PWP system

The Schwanog PWP system is ideally suited for profile grooving of internal contours up to a groove width of 25 mm. The quick change of the inserts and a high degree of change precision mean that it is usually possible to continue machining immediately after changing tools without readjusting

  • For inside diameters > 15mm

WEP system

The Schwanog WEP System is ideal for the production of interior grooves up to a groove width of 8 mm. Due to the quick changeability of the inserts and a high degree of change accuracy, it is usually possible to continue machining immediately without re-setting.

  • For internal diameter > 15 mm

WSI system

The Schwanog WSI system enables radial or axial internal grooving in the smallest diameter ranges. The internal grooving inserts are continuously adjustable in length via an adjusting screw in the Z-axis, thus providing optimum stability and functionality when setting up and changing tools.

  • For inner diameter: > 2 mm

.

G-System

The Schwanog G-System is predestined for axial face grooving from 5 - 12 mm groove width at variable turning diameters. Due to the insert seat, the insert can be used from a turning diameter > 8mm. The insert can also be profiled laterally, so that more complex profiles, similar to a step drill can also be produced.

  • Groove widths: 5 - 12 mm

Similar applications