05. July 2023

Milling of special forms with the Schwanog PWP system

Broaching reaches its limits when the material of the part to be machined has a very high tensile strength. This is where milling with the Schwanog PWP system has proven its effectiveness. With the 2-edged insertable tool, grooves can be milled with a precision of ± 0.01mm. Thanks to the quick-change capability of the inserts and a high changeover accuracy, machining can usually be continued immediately after a tool change without readjustment.

 

Overview of the technical facts:

  • Complete machining directly on the machine
  • Elimination of separate post processing
  • Fast and process-safe machining
  • Significant increase in tool life using optimal carbide grades and coatings
Milling of special forms with the Schwanog PWP system!
Newsletter
pdf (51 KB)
EN