PWP system

Shaping reaches its limits when the component material to be machined has a very high tensile strength. This is where milling with the Schwanog PWP system has proven its effectiveness. With the 2-edged exchangeable insert, grooves can be milled with a precision of +/- 0.01 mm. Thanks to the quick-change capability of the inserts and a high changeover accuracy, machining can usually be continued immediately after a tool change without readjustment.

VHM milling cutter

Schwanog VHM cutters for outside grooves are used for high tensile strength materials from 1100 to 1300 MPa. Depending on the tool outlet, up to 5 cutting edges are available.

Similar applications