Milling of serrations

Shaping reaches its limits when the component material to be machined has a very high tensile strength. This is where milling with the Schwanog PWP system has proven its effectiveness. With the 2-bladed exchangeable insert, gears can be milled with a precision of +/- 0.01 mm. Due to the quick-change capability of the inserts and a high changeover accuracy, machining can usually be continued immediately after a tool change without adjustment.

VHM milling cutter

Schwanog solid carbide milling cutters for external gears are used for materials with high tensile strengths of 1100 to 1300 MPa. Depending on the tool run-out, up to 5 cutting edges are available. Finish machining is possible directly on a machine with C-axis.