PWP system

Broaching reaches its limits when the material of the part to be machined has a very high tensile strength. This is where milling with the Schwanog PWP system has proven its effectiveness. With the 2-edged insertable tool, grooves can be milled with a precision of ± 0.01mm. Thanks to the quick-change capability of the inserts and a high changeover accuracy, machining can usually be continued immediately after a tool change without readjustment.

Solid carbide cutters

Schwanog solid carbide cutters for cutting special forms on the outside diameter are used for component materials with high tensile strengths of 1100 to 1300 MPa. Depending on the tool run-out, up to 5 cutting edges are available.

Similar applications